Work table
Workbench
Balance table
Storage cabinet
Chairs
Sinks
Hand sinks
Trolleys
Stainless steel furniture for clean rooms
We offer a wide range of products designed and engineered for clean rooms. Our designers are available to adapt and modify our standard offering to meet your clean room requirements, based on your production needs and contamination isolation and control processes.
Our standard range is made of AISI 304 stainless steel with a Scotch Brite finish. All products can be customized to meet your specific requirements and can also be made of AISI 316 stainless steel with different finishes.
Work tables
The work tables are made of AISI 304 stainless steel with a Scotch Brite finish. The structure is made of 40×40 mm square tubes and is fully welded, and the rear legs are extended for rounded corners at the floor. The worktop is made of a first layer of stainless steel sheet, an internal plywood reinforcement, and a lower stainless steel cover, and the front edge is rounded R=10 to always guarantee maximum comfort for the operator.
Available on legs or wheels, with or without rear height and lower shelf. There is the possibility of mounting 1, 2, or 3 drawer modules under the worktop. A wide range of alternatives and accessories to satisfy any request.
Workbenches
Workbenches are the best solution for workstations requiring ample storage space. The worktop is reinforced and the front edge is rounded R=10mm for optimal comfort.
They are available in multiple variants, with or without back height, combining various types of compartments between drawers, hinged or sliding doors, depending on your needs.
If you have specific requirements for benches with central space, legroom, or any other configuration not offered on this page, please do not hesitate to contact us and we will work with you to find the most suitable technical solution.
If you are looking for a solution that facilitates cleaning operations, you can opt for simple work tables on legs with mobile cabinets that can be placed under the worktop.
Balance tables
Balance tables are made of a structure of 40x40mm square tubes, fully welded, and the rear legs are advanced for the rounded corners of the floor.
Worktop with internal reinforcement and stainless steel underlay; rounded front edge r=10mm.
Available with or without a raised rear edge, the balance table has one or two openings in the worktop to allow for the placement of a 400x400x40h mm black granite worktop, supported by rubber spacers that isolate the worktop from vibrations.
Storage cabinets
The storage cabinets are made entirely of stainless steel and are equipped with smooth, reinforced shelves that are adjustable in height and hinged or sliding doors made of stainless steel or glass.
The structure is made of 1 mm stainless steel sheet, welded at various points for greater strength and stability.
The doors are double-walled and mounted on hinges or guides that allow for complete, quick, and easy removal for cleaning operations.
The height-adjustable legs, designed for rounded floor corners, allow for easy and perfect positioning of the cabinet in its final location.
Delivered already assembled, you just need to remove the protective film and place it in the designated space in your clean room.
Available with shelves and an open compartment with a hanging bar.
Sinks
Stainless steel sinks with backsplash and rounded front edge r=10mm, including stainless steel drain, PVC overflow, and PVC siphon.
They can be made on a square tube structure, on a cabinet with hinged or sliding doors, with one or two bowls, with or without drain.
The sinks can be delivered with one of the accessories proposed in the accessories section, or the countertop can be prepared with a special hole for positioning one or more accessories of your choice and equipment.
Hand washing sinks
Compact solutions, perfect for installation in staff rooms and clean rooms.
Stainless steel hand washing sinks are available with a hand washer, for wall mounting or on a hinged door cabinet.
They come with a drain and trap and are available with or without a tap and knee-operated control for optimal hand washing before entering classified areas.
Chairs and stools
Chairs and stools specially designed for use in clean rooms. They are made entirely of AISI 304 stainless steel and are completely removable for optimal cleaning of the various parts in an autoclave.
The seat height can be adjusted from 450 mm to 600 mm to suit each user.
They are available with or without a height-adjustable backrest, on legs or on wheels with a 5-spoke base.
Service trolleys
Service trolleys can be delivered fully welded or assembled on site with shelves to be bolted onto the structure. They are equipped with a pull handle for easy movement and can be configured with 2 or 3 smooth or perforated shelves with a perimeter retaining edge h=40mm.
Our standard offering includes simple shelves, so if you require specific dimensions or configurations not listed here, such as shelves without a perimeter edge or shelves with trays, we are available to design and manufacture the specific trolley you are looking for.
For different transport needs, we offer the low platform transport trolley that can support heavy weights or the drum trolley with a single shelf and no handles.
Need help in choosing a product?
